Sumeru Unique Level Putty is designed for surface levelling with low shrinkage, self curing, water resistant, breathable & thin plaster putty which can be used as a base coat on plastered surfaces & RCC for indoor & outdoor applications.

• Levelling work in wall & ceiling
• Low shrinkage levelling coat for cement surface
• Levelling layer for removal of roughness or undulance on wall plaster & RCC
• Direct application on RCC
• Use for proper line level work

• Low shrinkage property for sharp finishing work
• Super Bonding power with base surface
• Good breathability, better water resistant
• Can be applied on moist surface
• Never peels off, provides great adhesion
• Can be used for built up of 15 mm in two coats

Clean the wall with grinder, wire brush or rough paper. If any leakage in the wall than repair the crack from outer side of wall. Remove all fungus, algae, greasy, dust & loose particles. Before application pre-wetting the wall with water.

Sumeru Unique Polymer Putty mix with clean water and mix with mechanical stirrer to get lumps & air bubble free material. Apply first coat of Sumeru Unique Polymer Putty on pre-wetted surface with putty blade or trowel. Mix only quantity of putty which can be used in workable time. When first coat is dry use fine emery paper & apply second coat of fresh material. Total thickness of two coats must be 15 mm. Thickness greater than 1.5 mm due to unskilled application can cause a problem.