• Sumeru Master 601 is high performance polymer modified non-slip tile adhesive for fixing all type of fully vitrified tiles & glass mosaic, natural stones, engineered stone, marble, granite, low porosity tiles & stones on floor & cladding on wall for interior and exterior.

C2TE classified according to EN 12004

• - Wall & Floors
• - Interior & Exterior
• - Dry areas
• - Wet Areas
• - Showers
• - Swimming Pools

• - Flexible and high strength adhesive for natural stones.
• - Cladding, swimming pools, industrial and heavy trafficked floors in indoor and outdoor situation.
• - Slip resistant for vertical application.
• - Excellent Workability.
• - Easy mixing & application.
• - Ready to use.

Add Sumeru Master 601 to clean water mix thoroughly until lump free mortar is obtained. A Sumeru Master 601 is a 20 kg bag will require approx. 5-6 litres of water to obtain lump free consistency. The adhesive is immediately ready for use. Where mixing by weight is not possible, volume mixing can be carried out at site in the ratio of 26% -28% or (1 water: 3 powder) of water by volume of material. Do not attempt to extend the pot life by adding more water to the mix.

Using a suitable square notch trowel. Choose a typical notched trowel with sufficient depth to achieve > 80%. Mortar Contact to both tile and substrate for all interior applications and >90% for exterior installations. Leave no voids behind tiles, with pressure, apply a coat by using the trowels flat side to key mortar into substrate. If adhesive is skinned over (not sticky) remove and replace with fresh adhesive or premix.

Limitation of application Sumeru Master 601 shall not be applied in the following cases:
On metal surfaces and wood.