Unicoat thin – 111 is specially design for low thickness and high strength coating with selective
minerals and high-quality polymer additives unique combination suitable for smooth concrete
surface without hacking and on almostsurface indoor and outdoor application

• - suitable for mivan and precast and all type substrates
• - living of wall and ceiling, columns, beams
• - sharp corners, line, square, groove
• - artwork on surface by hand and mould
• - high grade concrete where hacking is not possible
• - ideal for thin coat application
• - used in place of gypsum and traditional plastering

• - pre-mixed to ensure good consistent quality
• - suitable for hand and machine spray application
• - easy to use (only to be mixed with water)
• - no curing, no shrinkage crack, non shrink
• - strong adhesion with substrate

• - Properties Test values as per specifications
• - Appearance: Grey powder
• - Polymer base Cementations mortar modified
• - Bulk density: 1.35 -1.50 kg/1 (at 27° C)
• - Pot life: 100 to 120 minutes
• - Compressive strength: 6-7 mpa
• - Thickness of layer: 5 to 15 mm two coat
• - Water powder ratio: 20% to 23% by weight
• - Water curing: Nil
• - Coverage: 38-40 sq. ft (5mm thickness) 25 kg bag
• - Wastage: Negligible
• - Final Finish: Smooth and Excellent

25 Kg