Sumeru Uniguard is a fibre reinforced elastomeric liquid applied water proofing membrane. It is formulated with selected elastomeric and resilient acrylic polymers and reinforcing polypropylene fibres.

Heat reflecting cum temperature reducing coating system. This coating combines the
multiple benefits of single product.

• - Suitable for all exposed areas.
• - Roof slabs, parapet, Ips, sound brick-bat coba.
• - Sunshades Cementous water proofing.
• - Suitable surface preparation and repairs.
• - RCC/asbestos/lime terraced roofs.
• - Can be used as exterior coating for PVC water tanks exposed to direct sunlight on roofs, balconies, etc. to keep the inside water temperature relatively cooler.
• - For further reinforcement use glass fibre mesh on joints, drainpipe, corners or on any cracks.

• - Waterproofing protection up to 7 bars hydrostatic pressure.
• - Reinforced with glass fibres for superior abrasion resistance.
• - Reduces carbon dioxide and chloride in diffusion and thus protecting re-bars against corrosion.
• - High shine, sparkling white colour and thick coat results and high levels of heat reflectance.
• - Algae and fungi resistant.
• - Cross linking polymer gives excellent weather resistance and enhances service life.
• - Excellent adhesion to concrete, brickwork, corrugated asbestos, asbestos cement sheet and metal decks.
• - Ultra violet rays and weather resistant.
• - Crack bridging due to elastomeric.
• - No Protective screed required for normal Foot Traffic.

All Supporting surfaces shall be structurally sound solid stable, dry completely cured level. All uneven surfaces should be properly treated by suitable sumeru material to get a plain surface. Existing coating/membranes have to be inspected clear and mechanical ground to achieve a sound, gripping substrate.

In case of bad adhesion to the substrateexisting coatings have to be removed. They shall be clean and free of oil, dust, grease, paint, tar substance and debris which may prevent or reduce adhesion respect on structural fractionizing & perimeter joints present in the surfaces.

For details refer Technical Data Sheet