Sumeru Uniprime is water based co proper -polymer multi purpose primer. It provides long lasting protection for terrace and wall against damp, white patches and whether intact be used as a seal coat for various water based products. It is efflorescence resistance penetrating primer.

• China chips, Glazed tiles and other smooth surface.
• Can be used both before and after water based paints.
• Suitable primer for interior and exterior surface.
• Concrete, stone, plaster, wall, terraces, roots.
• Gypsum board, POP, Asbestos, bricks, false celling, cementitious renderings, wall putty etc.

• Excellent adhesion to surface like glazed tiles, china chips.
• Its chemical anchoring without mechanical abrasion.
• Damp proof resistance due to proper polymer.
• Sealed pores and non- pores substrate.
• It has excellent recoat ability.
• Very good efflorescence resistance.

All Supporting surfaces shall be structurally sound, solid, stable, dry & completely cured well. All uneven surfaces should be properly treated by suitable Sumeru materials to get a plain surface. Existing coating/membranes have to be inspected clearly and mechanically sound to achieve a sound, gripping substrate. In case of bad adhesion to the substrate existing
coatings have to be removed. They shall be clean and free of oil, dust, grease, paint, tar substance and debris which may prevent or reduce adhesion respect on structural fractionizing & perimeter joints present in the surfaces.

Sumeru Uniprime is ready to use in a single component. Mix thoroughly using a conventional paint stirrer before the application. Apply a single unmixed coat of uniprime on clean substrate by brush or roller. Allow it to dry for 3 to 4 hours before starting further finish coats. In case of use with Uniprime, please apply as per standard application procedure as mentioned in the product information sheet for the product. Clean all equipment with water.

For more details refer Technical Data Sheet.