Sumeru Unique Polymer Putty is specially design for polluted water which is polymer base breathable, water resistant putty for indoor and outdoor application.

Premix white cement combination with designed polymer give, protection with smooth finish & splendid white look.

• Finishing work in wall ceiling
• Smooth finish coat for precast RCC work
• Smooth finish coat for precast RCC work
• Weather protective coat for cement base surface

• Special protection from pollution, water & air
• Good breathability
• Better water resistant
• Super bonding power
• Smooth finish surface
• Can be applied on moist surface
• Never peels off, no flaking, no chalking
• Simple application, better coverage
• Decorative caring without use of conventional paint

Clean the wall with grinder, wire brush or rough paper. If any leakage in the wall than repair the crack from outer side of wall. Remove all fungus, algae, greasy, dust & loose particles. Before application pre-wetting the wall with water.

Sumeru Unique Polymer Putty mix with clean water and mix with mechanical stirrer to get lumps & air bubble free material. Apply first coat of Sumeru Unique Polymer Putty on pre-wetted surface with putty blade or trowel. Mix only quantity of putty which can be used in workable time. When first coat is dry use fine emery paper & apply second coat of fresh material. Total thickness of two coats must be 1.5 mm. Thickness greater than 1.5 mm due to unskilled application can
cause a problem.